ImagOn Techniques
 
Basic ImagOn Process 
....
General Safety
Printmaking Safety
Textbook reference:  
pp 
Types of Plates 
. .ImagOn Process Index  Almost any stable, non-oily flat surface that will accept the ImagOn film can be used as a plate.  
.  .ImagOn Techniques 

 .Basic ImagOn Process
.
..Projects   
   
..Schedule   
 

In order of preference: 
  • Roofing copper
  • galvanized sheet metal
  • zinc
  • brass
  • plywood or 
    wood block plates
  • aluminum
 
  • Plexiglas
  • Lexan
  • stainless and mild steel
  • polyester sheeting
  • collograph plates
  • linoleum.
.
.. Plate Degreasing For Non-Copper Plates .
..Printing    
    
 .Ink Cleanup    

 .Plate Prep    
.

Galvanized sheet metal or aluminum sheeting 
  • not necessary to sand
  • Must thoroughly clean with Comet or Ajax Cleanser and kitchen pot scrubber. 
.
 .Use of Photocopies   

 . Additives & Cleaners   .

Plexiglas, Lexan and polyester sheeting 
  • No sanding necessary.
  • Be sure that there are no oily marks of finger prints on the surface. 
  • A fifty percent alcohol and water solution is sufficient to clean these surfaces. 
.
. Wood and Linoleum 
  • Coat wood with three coats of Future
  • plate can easily be reworked with wood- block cutting tools after the ImagOn has been developed on to the surface of the wooden blocks.
.
. see next file: Laminate ImagOn to Plate Surface .
 
Home  Printmaking  
Main Menu
 Intaglio (Etching)  
Main Menu
Intaglio-Type (ImagOn) 
Main Menu..

© Beth LaCour 1999

arts-in-company  |  Printmaking Main Menu Intaglio (Etching)   |  intaglio-Type  |   Intaglio Techniques.  |  Printmaking Links at MTSU  |  Links